Car And Truck Brake Parts

Silver Powder

Thanks for visiting our site!
Silver Powder
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Here are some more information for Silver Powder:

Jewelry can be beautiful to look at, fun to buy, and can make bold and revealing statements about you. Hear are some tips for greater enjoyment of your favorite gold and silver jewelry.

1. Never swim in a chlorinated pool while wearing gold and silver jewelry.
2. Always apply make-up, perfumes, oils or colognes before you put on your gold and silver jewelry
3. Keep both your skin and your gold and silver jewelry clean and free of oil.
4. Using an absorbent, abrasive-free body powder on areas that your gold and silver jewelry touches your skin can help with skin discoloration.
5. If you do have any skin discoloration you may need to move to a higher gold content. Say, from 14K gold jewelry to 18K jewelry.
6. Are your gold and silver chains all tied-up in knots? If so, here's a nifty little trick for straightening them out. Dust your chain with a little talcum powder and then try to unknot it. If the knot is stubborn, place a small drop of baby oil on a sheet of wax paper. Lay the knot in the oil and work it out with two pins; then clean the chain as instructed below.
7. Don't be afraid to wear gold and silver jewelry together. Artful use of accessories that use both metals provide an effective visual segue' or bridge.
8. For daily cleaning it is recommended to use a simple jewelry polishing cloth that is impregnated with special jewelry cleaner. These are widely available and are very easy to use. Store your cloth in a plastic zip-lock bag, and keep in your jewelry drawer or armoire. It is a good idea to have one cleaning cloth for gold and one for silver.
9. For a Super Spring Cleaning of your gold and silver jewelry, mix 1cup of clean warm water with ½ cup of ammonia. Soak your jewelry in this solution for about 15 minutes; gently scrub with a soft, clean toothbrush, then rinse in warm water. Air dry on an absorbent paper towel. When thoroughly dry, you may lightly buff with a soft flannel cloth.
10. If a ring gets stuck on your finger; spray the area surrounding the ring with Windex. Wiggle and twist the ring right off.
11. For a slightly more "in depth" cleaning you may want to use a liquid jewelry cleaner.
12. For cleaning badly tarnished silver, here's a neat little trick.
    • Cover the inside bottom of a heat-proof glass dish on bowl with a piece of aluminum foil, shiny side up.
    • Place the tarnished silver in the bottom of the dish, contacting the aluminum foil.
    • Add 1 heaping tablespoon of baking soda, and then slowly pour boiling water to cover the piece. The tarnish will gradually collect on the aluminum foil.
    • Remove your silver, rinse thoroughly, and polish.

Learn How To Buy Jewelry And Gemstones Without Being Ripped Off. This informative Special Report reveals little-known facts and insider trade secrets that many jewelers would prefer you didnÂ’t know. To get your FREE copy please go to http://www.morninglightjewelry.com.

What Are Characteristics And Important Uses Of Silver?

Chemists classify silver both as a transition metal and a precious metal. Precious metals are not very abundant in the Earth's crust. They are attractive and not very chemically active. These properties make the metal desirable in jewelry, coins, and art. About a half dozen metals near silver in the periodic table are also precious metals. These include gold, platinum, palladium, rhodium, and iridium.

Silver has been used by humans for thousands of years. It often occurs as a free element in nature. It can also be extracted from its ores fairly easy. These properties made it easy for early humans to learn about silver. Today, the most important use of silver is in photography. Three silver compounds used in photography are silver chloride (AgCl), silver bromide (AgBr), and silver iodide (AgI). Silver is also used to make electrical equipment, mirrors, medical and dental equipment, and jewelry. It is often used to make alloys with gold for some of these applications. 

Silver was probably first discovered after gold and copper both of which often occur as free elements in nature. They have very distinctive colors, which made it easy for early humans to find these metals. Silver also occurs as a free metal, but much less often than gold or copper. At some point, humans learned to extract silver from its ores. But that discovery must have occurred very early on in human history. Archaeologists have found silver objects dating to about 3400 B.C. in Egypt. Drawings on some of the oldest pyramids show men working with metal, probably extracting silver from its ores.

Other early cultures also used silver. Written records from India describe the metal as far back as about 900 B.C. Silver was in common use in the Americas when Europeans first arrived. The Bible contains many references to silver. The metal was used as a way of paying for objects. It also decorated temples, palaces, and other important buildings. The Bible also contains sections that describe the manufacture of silver. The word silver goes back to at least the 12th century, A.D. It seems to have come from an old English word used to describe the metal, seolfor. The symbol for silver (Ag), however, comes from its Latin name, argentum. The name may have originated from the Greek word Argos, meaning "shiny" or "white." Silver is a soft, white metal with a shiny surface. It is the most ductile and most malleable metal. Silver has two other unique properties. It conducts heat and electricity better than any other element. It also reflects light very well.

Silver is a very inactive metal. It does not react with oxygen in the air under normal circumstances. It does react slowly with sulfur compounds in the air, however. The product of this reaction is silver sulfide (Ag2S), a black compound. The tarnish that develops over time on silverware and other silver-plated objects is silver sulfide. Silver does not react readily with water, acids, or many other compounds. It does not burn except as silver powder.

Silver is a fairly rare element in the Earth's crust. Its abundance is estimated to be about 0.1 parts per million. It is also found in seawater. Its abundance there is thought to be about 0.01 parts per million. Silver usually occurs in association with other metal ores, especially those of lead. The most common silver ores are argentite (Ag2S); cerargyrite, or "horn silver" (AgCl); proustite; and pyrargyrite. The largest producers of silver in the world are Mexico, Peru, the United States, Canada, Poland, Chile, and Australia. In the United States, silver is produced at about 76 mines in 16 states. The largest state producers are Nevada, Idaho, and Arizona. These three states account for about two-thirds of all the silver mined in the United States.

Two naturally occurring isotopes of silver: silver-107 and silver-109exist. About 16 radioactive isotopes of silver are known also. None of the radioactive isotopes of silver has any commercial use. Ores rich in silver disappeared long ago due to mining. Today, silver usually comes from ores that contain very small amounts of the metal. These amounts can range from about a few thousandths of an ounce per ton of ore to 100 ounces per ton. The metal is most commonly produced as a by-product of mining for other metals. After the primary metal has been removed, the waste often contains small amounts of silver. These wastes are treated with chemicals that react with the silver. The silver can then be extracted by electrolysis. Electrolysis is a process by which a compound is broken down by passing an electric current through it. A small percent of silver produced in the United States is used for coins. The old "Peace" silver dollar, shown here, was minted from 1921 to 1935.

About 10 percent of silver produced in the United States is used in coins, jewelry, and artwork. One way silver is used is in alloys with gold. Gold is highly desired for coins and jewelry. But it is much too soft to use in its pure form. Adding silver to gold, however, makes an alloy that is much stronger and longer lasting. Most "gold" objects today are actually alloys, often alloys of silver and gold. Other objects use much more of the silver metal, however. The second most important use of silver is in electrical and electronic equipment. About 20 percent of all silver produced is used for this purpose. Silver is actually the most desirable of all metals for electrical equipment. Electricity flows through silver more easily than it does through any other metal. In most cases, however, metals such as copper or aluminum are used because they are less expensive.

Taking a photograph depends on a simple chemical idea: Light can cause electrons to move around. Here is what that means. Silver metal will combine with chlorine, bromine, or iodine to form compounds. In this reaction, each silver atom loses one electron to a chlorine atom. The silver atom becomes "one electron short" of what it usually has. The one-electron-short silver atom is called a silver ion. Photographic film is coated with a thin layer of silver chloride, silver bromide, or silver iodide. That means the film is covered with many silver ions. Silver ions are colorless, so photographic film has no color to it.

What happens when photographic film is exposed to light? Light gives energy to electrons in the photographic film. Some of these electrons find their way back to silver ions, transforming them back to atoms. But silver atoms are not colorless. They are black. So, a photographic film exposed to light turns black at every point where light strikes a silver ion. In taking a picture, of course, not all of the film gets equal amounts of light. A picture of a person, for example, will have areas that get much more light than others. So some places on the film become very dark, and other places become less dark. Additional steps are necessary to "develop" photographic film or to produce a picture from it. But the first step in taking a photograph is changing silver ions back to silver atoms with light.

But sometimes, an electrical device is so important that cost is not a consideration. For example, electrical devices on spacecraft, satellites, and aircraft must work reliably and efficiently. The cost of using silver is not as important as it would be in a home appliance. Thus, silver is used for electrical wiring and connections in these devices. In some cases, silver plating solves a practical problem where the more expensive silver would work best. Silver plating is the process by which a very thin layer of silver metal is laid down on top of another metal. Silver is so malleable that it can be hammered into sheets thinner than a sheet of paper. Silver this thin can be applied to another metal. Then the other metal takes on some of the properties of the silver coating. For example, it may work very well as a reflector because silver is such a good reflector. It does not matter if the second metal is a good reflector or not. The silver coating serves as the reflecting surface in the combination.

About a fifth of all silver produced is used in a variety of other products. For example, it is often used in dental amalgams. Silver amalgams work well for filling decayed teeth. They are non-toxic and do not break down or react with other materials very readily. Silver is also used in specialized batteries, including silver- zinc and silver- cadmium batteries. Electricity flows through silver more easily than it does through any other metal. Silver is a mildly toxic element. When the metal or its compounds get on the skin, they can cause a bluish appearance known as argyria or argyrosis. Breathing in silver dust can have serious long-term health effects also. The highest recommended exposure for silver dust is 0.1 milligrams per cubic meter of air. 

About the Author

Dr. Badruddin Khan teaches Chemistry in the University of Kashmir, Srinagar, India.

what is that silver powder on moths?

i just killed a moth, and a shiny, silver powder got on my hand and on my wall. i was just wondering what that is.

They are scales from the wings. Scales are loosely attached at the base, so if a moth gets into a spider's web, it can pull free, leaving scales behind. This is advantageous for survival of scaled moths over unscaled moths.

USFS extends Bear Creek Snow Study
What was closed to backcountry skiers last winter in the silver and cold morning hours will remain that way: A ski-area-ran snow study in Bear Creek will continue through this winter on the heels of an extension granted by the U.S. Forest Service.

Thanks for visiting!