Car And Truck Brake Parts

Wiring Harness

Thanks for visiting our site!
Wiring Harness
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Here are some more information for Wiring Harness:

If you have little cash but want a better sounding stereo system in your vehicle, installing a stereo yourself can save you a tremendous amount of money. It is relatively easy to install a new CD player or radio in your car, especially if you have had any experience in wiring or electronics.

The standard car stereo system is installed in the dash; therefore, this article will provide the steps necessary to complete this task. Custom or modified vehicles will require a different set of instructions for stereo installation. For this task you will need a new car stereo or CD player (which is also called a head unit), wire strippers, electrical tape, a screwdriver set, and wire cutters. You will also need a guide outlining how to remove your dash panel and how to adequately remove the old stereo system without causing any damage. By following these simple steps, you will be enjoying your new stereo in no time!

1) Buy a new stereo system. Purchase one that fits properly where your old one was located. In addition, when purchasing a stereo you might wish to get a specific wiring harness which is specific for your new stereo and your vehicle's make and model. Wiring harnesses make the whole wiring job a snap, literally.

2) Make sure the engine is turned off. Disconnect the negative (black) battery cable. Never work on any part of your car's electrical system with the battery connected, as the electrical shock could be fatal.

3) According to your manual, remove the dash panel surrounding your stereo. Unscrew and remove your old stereo (head) unit. On the back of the unit there will either be a batch of individual wires or one single plug connecting a lot of wires. If you find a whole bunch of wires, do not take them apart just yet. You will need to do them one at a time in a few moments in order to avoid confusion.

4) Wiring can be connected manually or with the wiring harness. If you have a wiring harness do step 5, then skip to step 9. If you do not have a wiring harness, skip step 5, and follow steps 6 through 8.

5) Plug your new wiring harness into the connector, if you were able to purchase one. This wiring harness will then plug into the backside of your new car stereo. If you were able to do this, then you can skip steps 6-8.

6) You will need to connect each of the wires manually if you did not buy a wiring harness. Connect positive wires from each of your speakers to positive connectors on the backside of your stereo first. Next, connect negative wires from each of your speakers to negative connectors on the stereo. If you find only one wire coming from each speaker this means that they have been grounded at the chassis. If this is the case, new speaker wiring must be installed.

7) Connect the -/black (ground) wire on the stereo to a bolt or screw near where the stereo is mounted within the dash. This attachment must be made to metal, not fiberglass or plastic.

Connect both +/red ignition power wires and the 12 constant wires to the new radio. Refer to the installation manual for correct placement of these wires.

9) You should now have a single connecter which is can be hooked to the proper wires in your vehicle, either through the new connection made in steps 6-8 or from your wiring harness.

10) Slide the new stereo into your mounting bracket, which should have been included with purchase. In some cases, you may need to use your old bracket from your original stereo.

11) Plug the wiring harness connector into the backside of your new radio or CD player. You should see one, single wire hanging unaccounted for, coming from your old system. This wire is your antenna. Plug this wire into your new stereo unit. You may also see a power antenna wire, which must be connected as well.

12) Slide the stereo into dash slot. Test it before screwing it in. Reconnect your battery cable. Start your engine to power up the stereo. Turn on some music and listen for the performance of each speaker. If everything seems to be working well, screw your stereo into place and replace your dash cover.

Bond Mejeh produces automotive related articles for Quick Cash Auto, a cash for cars service. Quick Cash Auto not only buys pre-owned vehicles of any year, make or model, but they also provide numerous articles about vehicle repair and automotive news.

Please visit http://www.QuickCashAuto.com for more information and be sure to check out our automotive blog.

Perfect Cable Wiring In A Vehicle Sound System

Everyone aims of owning a car which has a cool, stylish, professional car stereo. In those cases one would consider wiring as the last option for his car. Noise suppression must be made in it so as to increase its aesthetics and performance of the car stereo. For this you must have the wire hidden as much as possible. But how to hide the wiring in auto stereo installation?

In the cases of uncovered wires there are possibilities of the noise transfer from one cable to the others. These wires are to be hidden to give a highly professional and customized look to your car stereo. Hiding the wire will also make it live longer as it reduces risk during accidents. There are few basic tools required for this task. They are Velcro stripping material, putty knife, cable ties, cordless drill, wire cutter, sheet metal screws, hex bits, flexible cable tubing.

The main wires from the battery connections are to be hid first. This is the most important thing to be to be done initially. For accomplishing this the car's engine compartment is to be fitted with a specially designed plug. The wires are held in place by the small clamps and by using this and sheet metal screws one can install it to the frame of the car. Holes are drilled to fix these.

The next step involves the closing of tubing up by the zip ties. It is placed in a position about two to three feet below the flexible cable tubing. To avoid splicing of wires one can the wires should be connected together using the wiring harness. Such wiring harness can be bought from any car stereo shop.

The ideal place for keeping the wires under cover can be car's trim or its carpet or the indoor plastic trim. A putty knife can be used for pulling up the edges and also it can be used for pulling it down. When wires of different causes meet there is possibility of noise interference. To avoid this one can ensure from the car stereo shop personnel on what all wires to be bundled together and what all to be made to run in an opposite direction.

Avoid mounting of wires near any kind of sharp edged objects which may possibly damage the wires. The flexible cable tubing can be held up by the Velcro stripping material without drilling any kind of holes. While running back these wires to the sub woofers, rear speakers, amplifiers and crossovers hiding the wires at the back panels is essential.

Consult with a shop personnel on how to remove these wires without damaging them. There are special connectors at the amplifiers and sub woofer which shows off the connections alone. Custom built panels can also be used for giving a very professional look to the car stereo system.

Answering the question how to hide the wiring in auto stereo installation, becomes simple by just following the steps mentioned above which will make it very simple.

About the Author

Find the best Car Hifi at bargain prices and much more information on Car Audio for the right car stereo. Powernetshop.at have the best product evaluation on the internet.

Wiring Harness?

Ok my boyfriend has a 2.3 Turbo motor out of a 1983 Ford Thunderbird. The motor has the distributor and the injectors BUT we need the wiring harness to wire the distributor and everything up. We cannot find a wiring harness to save our lives. NO ONE seems to have it. Does anyone know of any websites that I could possibly find one??? I think the turbo motor we have can work for a mustang too. An 83-85 2.3 Turbo motor from a Thunderbird or a Mustang. Please Help!!

try this web site
http://www.painlessperformance.com/

Supplier News: Related News
6/7/2010 - Behind the Scenes at DTNA's Testing Program What has seemed like an almost flawless launch for the Detroit Diesel DD13/15/16 has likely been because of the Reliability Growth testing, started back in 2005 at Daimler Trucks North America's new facility in Portland, Ore.

Thanks for visiting!